 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Usage: | Battery Testing Equipment | Display Method: | PLC Touch Screen |
|---|---|---|---|
| Internal Size: | 500*500*500mm L*W*H (Customized) | Internal Material: | A3 Steel Bord With Bake Paint Coating Thinkness: 1.2mm |
| External Material: | SUS #201 Stainless Board Thinkness: 1.0mm | Use Power: | 220V, 50 / 60Hz |
| Observation Window: | 250*250mm | Test Hole: | D.50mm; For Power-on Test |
| Warranty: | 12 Months | ||
| Highlight: | battery testing equipment,battery and cell test equipment |
||
Battery explosion-proof testing machine
High low temperature battery explosion-proof testing machine
Overview:
Battery explosive-proof test chamber is mainly used for protection on technicians and machines in battery over-discharge test. The chamber can be customized for different needs of test.
Standard:
GB 31241-2014; GB/T 18287 -2013; GB/T 8897.6-2008; YD/T 2366.1-2011; GB/T 21966-2008, MT/T 1051-2007
Specifiaction:
| Internal Size(single chamber) | 500*500*500mm L*W*H (Customized) |
| Internal Material |
A3 Steel bord with bake paint coating Thinkness: 1.2mm |
| External Material |
SUS #201 Stainless board Thinkness: 1.0mm |
| Material | Single, double, inner door is made of stainless steel, and silica gel is used to tighten the door and chamber. |
| Door | Equipped with observation window; There is a strong connecting hinge, explosion proof handle between the door and chamber |
| Observation window | 250*250mm |
| Test hole | D.50mm; for power-on test. |
| Teflon tape is added inside the chamber, which is for a effective insulation, flame retardant and easy to clean up. | |
| The separate test panel controls the lighting and exhaust of each test room. When samples burning, the fan automatically works and exhausts smoke. | |
Usage:
Battery explosion-proof box is mainly used for battery over-charge and over-discharge test. The battery is put in the explosion-proof box, connected to external charge and discharge tester. The operator and equipment are under protection.
Standard:
GB 31241-2014 Safety requirements for lithium ion batteries and battery pack for portable electronic product
GB/T 18287 -2013 General specification for lithium ion batteries for cellular telephones External short circuit requirements
GB/T 8897.6-2008 The sixth part of the primary cell: safety requirements of lithium batteries
YD/T 2366.1-2011 The first part of lithium iron phosphate batteries for communication: integrated batteries
GB/T 21966-2008 Safety requirements for lithium primary batteries and storage battery in transit
MT/T 1051-2007 Lithium ion battery for miner's lamp
YD 1268-2003 Safety requirements and test methods for lithium batteries and chargers of mobile communication handsets
GB/T 19521.11-2005 Safety specification for hazardous features inspection of dangerous cargo of lithium batteries
YDB 032-2009 Backup lithium ion battery for communication
UL 1662:2012 Standard for lithium battery
UL 2056: 2012 Household and commercial batteries
UN38.3(2012) The third part of Recommendations on the transport of dangerous goods - Test and standard manual
IEC62133-2012 Safety requirements for storage batteries with alkaline or non acid electrolytes
Specification and Parameter:
1. Size of each test case :500*500*500mm(L*W*H);(or customized)
2.Material quality: outer container:3mm A3 steel plate with stoving varnish , inner container: SUS#201 stainless steel
3.Single door, double layer door, the inner door is made of stainless steel material.The front observation window is notavailable.
4.The door is connected with the box body by a strong hinge,explosion proof door lock
5. The side convection window: open a 250 x 250mm hatch at each side of each box (also can only open the front and back side), in order to abstract heat and convection. With stainless steel mesh, it can prevent explosion and splash effectively.
6.Put a electric board or affix the Teflon tape inside the test box,effective for inflaming retarding and insulation , easy to clean.
7.Open two circular mounting ports at the rear part of each box, which is convenient for the testing and connecting wires to pass through.
8.There is a separate test panel to control the lighting and exhaust of each test room.Smoke detection alarm is available, when there is a fire, the exhaust fan would be turned on automatically;
Advantage
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Our Company
OTS Instrument Co., Ltd.
was established in 1978, with over 35 years’ history, is one of the leading companies solely dedicated to manufacture of environment,class,mechanics,package testing equipment...
(such as constant temperature and humidity chambers, environmental chambers, thermal shock test
chambers,fast change rate chambers, yellowing resistance aging test chamber, salt spray chamber,
tensile testing machine, universal testing machine,carton compression testing machines, bursting
strength testing machine, vibration test, etc.) ...
OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing
requirement. with offices in unrivaled quality advantage, dynamic management team with superb manufacturing
process,also the quality with the world norms: ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI,
AATCC, IEC, VDE...
Contact Person: Mr.
